Company
Feldmeier Equipment Inc.
Location
New York, NY
Job type
Full-time
Posted
5 days ago
Via
via Jooble
Apply on
Job description
Description
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
More jobs
Welder III GE Vernova 2 days ago Aluminum Welder (6G MIG) RMS Energy 3 days ago BILINGUAL MIG Welder/Fabricator REM Inc 23–25 an hour 3 days ago Casting Welder Chicago Magnesium Casting Co 1 day ago Field Service Welder Badger Industries 2 days ago TIG Welder South Metraflex METRAFLEX COMPANY INC 20–22 an hour 11 hours agoFrequently asked questions
Quick answers about Welder Jobs in United States
Q
What is the median annual salary for welder jobs in the United States in 2026?
According to the Bureau of Labor Statistics, the median annual wage for welders, cutters, solderers, and brazers is projected at $51,200 in 2026 based on May 2023 data of $48,290 adjusted for 2% annual wage growth through 2033. Entry-level welders earn $39,600 annually (10th percentile), while experienced ones earn up to $68,500 (90th percentile). Overtime pay at 1.5 times the regular rate adds an average of $5,000 yearly.
Source: Bureau of Labor Statistics
Q
What visa is required for foreign nationals to work as welders in the United States in 2026?
Foreign welders typically qualify for H-2B temporary non-agricultural worker visas, with a FY2026 cap of 68,500 visas plus up to 64,000 supplemental, processed starting October 1, 2025. Employers must file Form I-129 at least 75 days before need, proving no US workers available. Visa valid up to 12 months, extendable to 3 years maximum.
Source: U.S. Citizenship and Immigration Services
Q
What education and experience are required to become a welder in the United States?
A high school diploma or GED is the minimum education requirement, with most employers requiring completion of a 6-month to 1-year vocational training program or apprenticeship. Entry-level positions need no prior experience, but 1-2 years of on-the-job training is standard for certification. Associate degrees in welding technology improve hiring chances by 25%.
Source: U.S. Department of Labor - Office of Apprenticeship
Q
What documents are needed to apply for welder apprenticeship programs in the US?
Required documents include a high school diploma or GED, proof of US work authorization (SSN or I-9 eligible), resume listing any vocational training, and birth certificate or passport for age verification (minimum 16-18 years). Safety eyewear and basic tools may be needed at orientation. Applications are submitted via state apprenticeship agencies by December 31 for January starts.
Source: U.S. Department of Labor - Office of Apprenticeship